Hey guys,

I made an automation that powers off my bluetooth speaker (using IR blaster) when ChromeCast is powered off for more than 10 s. Automation is working fine, but sometimes ChromeCast changes state from OFF to Unavailable and back to OFF in just a few seconds. I have no idea why is that happening, but it triggers automation and turns ON the speaker (it is the same IR button for ON and OFF) and gets it out of sync.

What condition or trigger should I use to make it work only when ChromeCast state changes from ON to OFF and ignores Unavailable to OFF?

There is my automation:


alias: Turn off JBL
description: if CC is off for 10 sec
trigger:
  - platform: device
    type: turned_off
    device_id: bc1049ea43a53092952d364749c3fb4c
    entity_id: ae0ea35649746ed5cea16f8d6ca54dd3
    domain: remote
    for:
      hours: 0
      minutes: 0
      seconds: 10
condition: []
action:
  - service: remote.send_command
    metadata: {}
    data:
      num_repeats: 1
      delay_secs: 0.4
      hold_secs: 0
      device: jbl
      command: "off"
    target:
      device_id: 4f1f3a13324e03646ff6b03aed27f2fe
mode: single

thanks in advance

  • SteadyGoLucky@sh.itjust.worksEnglish
    1·
    6 months ago

    Just specify from: on and to: off in the trigger. You can have both!

    I don’t know your automation format very well. My automations use a state trigger with from: and to:

    • rambos@lemm.eeOPEnglish
      1·
      6 months ago

      You are right, its working fine now. Wasnt aware that from/to was implemented. Thx