Immich! It’s an amazing self hosted Google Photos replacement.
Zigbee definitely fun with HomeAssistant. I have an SLZB-06M adapter which has PoE (important for me) and is a fairly “open” product (don’t need to jump through hoops to flash firmware). I read somewhere that it may offer Thread support at some point but wouldn’t count on that.
Not a lawyer; would this likely stand up in court? Obviously I wouldn’t risk it were I the dev, but just curious.
It’s pathetic that I’ll happily recommend my Emporia Vue2 energy monitor to folks running HA — not because it works out of the box, but because the company is aware of the community integration projects and seems ok with it, even if they don’t actually support it. (ESPHome Firmware flash gives you local control — It’s been pretty great!)
As others have said, I’d play with routing/IP forwarding such that being VPN’d to one machine gives you access to everything — basically I would set it up as a “road warrior” VPN (but possibly split tunnel on the client [yes I know, WireGuard doesn’t have servers or clients but you know what I mean]).
Alternately, I think you could do some reverse proxy magic such that everything goes through the WireGuard box — a.lan goes to service A, b.lan to service B, etc., but if you have non-http services this may be a little more cumbersome.
Does budget include storage? Tight budget without storage, even tighter with…
If power usage not a concern then used x86/x64 gear is probably the way to go. Surplus gear (corporate, university…) possibly an option for you. That’s a very tight budget though, so I don’t think it really gives you the luxury of choosing specs unfortunately. That said: I might go fot the best bones/least RAM/storage if you think you might upgrade it down the road. 4GB RAM with an upgrade path to 32 is preferable to 8GB non-upgradable IMHO. Likewise, 500GB spinny disk with extra bays and an NVME slot is nicer than 500GB SSD with no upgrade path. Again… really tight budget so this may all be out of the question.
I’m a fan of low power gear, so I’d recommend something like a Raspberry Pi 5 8GB, or another SBC (I just grabbed an Orange Pi 5 Plus and I like it so far — NVME, 16GB RAM, dual NIC). However these will be out of your budget, especially once you add case, power supply, and storage.
Good luck!
Parent said “one of,” not “the very first.” Wikipedia has US with 4 out of the first 10 metro stations https://en.m.wikipedia.org/wiki/List_of_metro_systems
Interesting to note is that some (all?) of those early metro systems are arguably more successful than the subsequent US systems.
Big difference for me between the RPi 5 and orange pi 5 Plus is more RAM and m.2 NVME support on board. It also has four additional efficiency cores and dual 2.5G NICs, but that’s less important to me.
Downside is it has a less polished ecosystem.
Overall though I’ve been happy! But I also love my collection of raspberry pis, so it’s a matter of taste I guess.
My ex is ATT fiber which, despite having zero love for ATT, was pretty great.
They are trying to get me back…but they don’t offer fiber (or any service!) at my new address.
I think this is hard to answer because there’s no “one way” to do this.
Do you want it accessible only in your house, and you’re running something like a raspberry pi? That’s one set of instructions.
Do you want it accessible from anywhere in the world, with proper TLS? That’s a little more complicated, and there are a million ways to do this — do you want to self host and expose public IP? Self host using a VPN as the entry point? Host on a VPS?
I would recommend playing around with it first. This is easiest if you can get a well-supported environment, so something like a raspberry pi is best IMHO if you want to play around with minimal frustration.
It really is. I absolutely love the shared link functionality, with the ability to easily set an expiration date and manage existing shared links.
It’s made taking pictures a lot more fun for me.
How many photos? It’s a very good user experience for me, with 123GB library (23k+ photos, 1k+ videos). Fairly entry-level Samsung phone and iPhone 13, both work great.
Running on an Orange Pi 5 Plus.
Absolutely love Immich. Was previously running on an RPi 4 w/4GB RAM, but with the other services I had on there I needed to disable ML. Orange Pi 5 Plus (16GB RAM) and it’s just a dream. Kicked off ML/facial recognition before bed and it was done in the morning. Migration from RPi to OPi was straightforward.
Can you share the log output? Alternately, if running from Docker, can you run in the foreground and see if any error message shows up?
Oracle. Philosophical issues aside I’ve been happy, and can’t beat the price. Bandwidth is pretty limited, but that’s not a huge problem for me right now.
+1 for the Oracle solution. I use one for my public IP, and port forward over WireGuard to my home. They claim something like 480Mbps, but it’s nowhere near that, at least for external traffic. But in any event I’ve been using it for a few months with no real complaints.
And yes, I fully appreciate the irony of trying to self-host services to get away from big corporations, but relying on Oracle to do so.
Cool! I just got an Orange Pi 5 Plus, 16GB RAM**, but haven’t set it up yet so can’t give any recommendations. On paper though it looks great — significantly beefier than a RPi 4 (my current server), and supports M.2 NVME as well. Might be worth looking into for your use too, but the emphasis here is kinda on computing with a very low power budget, so I’m sure you could get more horsepower with e.g. an x64 NUC or similar.
Here’s a review, and note that this is without extra heatsink so it was probably thermally throttling (as was the RPi?): https://www.phoronix.com/review/orange-pi-5
**I first ordered the 32GB version but it got seized for counterfeit postage, and then some shenanigans ensued. If buying from Amazon I would suggest only buying units in stock and shipped from Amazon. May only apply to US though…
[Billionaire Taylor] Swift, who has publicly aligned herself with the pro-choice movement and declared her opposition to former President Donald Trump, has become the ire of a vocal group of conservatives hell-bent on the bizarre notion that the singer is a political weapon aimed at the upcoming presidential election.
I mean, I’m no Swiftie, but that seems pretty reasonable to me…
How much do you care about power/energy usage?
Also, how important is having one do-it-all server vs. a few separate servers? Sounds like you’re ok with at least two servers (Pi turns into HA OS, and you get a new one for everything else).
I see. In this case the 30 years is irrelevant I think.
This is probably PITI cost — principal, interest, taxes, insurance. Principal and interest are zero here, but the other two continue for as long as you own the home (property tax is annual like income tax — it’s not a one-time-deal like sales tax).
The home insurance covers the home, so it’s useful for all interested parties (owner, possibly bank).
Even if the bank doesn’t have any interest in the house (cash sale/no mortgage), I would absolutely want to insure the house!
Owning a house means you don’t pay rent, but you do have to pay taxes and, unless you really want to gamble, insurance.
Online calculators almost always include, or have an option to include, these costs. In part it’s because that’s the number the bank will use to determine what you qualify for. Makes it much easier to say, “here’s your monthly obligation” and compare that to you monthly income, instead of “here’s your monthly obligation, and here’s your twice-a-year tax obligation.”
I love my orange pi (5+, 16GB, 256GB eMMC, 2TB NVME). New, with case and eMMC (excluding NVME) was about $200.
Smart switch says it idles at about 2.9W, transcoding 1080p with Jellyfin draws about 5W (at several hundred FPS with HW transcoding — so it presumably won’t draw that much for the entire duration of the media). Not sure how reliable smart switch is at those powers but I’m guessing it’s ballpark accurate.
Works flawlessly for Immich of course.
The duel 2.5G NICs are underutilized by me but kinda fun to have I guess.
For me, idle power is important, so the ARM SBC route is pretty appealing. A new x64 NUC at same price might offer comparable performance I suppose, and something used could be beefier at the expense of more power usage. But to each their own!