Pretty sure the time is just edited, unless there’s some way to tell Google “Yes have me circle this roundabout a bazillion times”

Why would Amazon want to hinder the accuracy of the price tracking in that way?

Accurate price tracking leads to people saying “Oh well it was 50% less a year ago. I’ll wait on a sale, not paying full price on that” and waiting on a sale, leading to less conversions. Amazon has pressured Camelcamelcamel into agreeing to not track specific low prices (i.e., Prime Day, if that actually had any good sales). I’m unsure if they track coupons or not, they were not clear about what the criteria for not tracking a price are.

Camelcamelcamel is unfortunately compromised by Amazon, it’s probably mostly accurate but there are price points they do not accurately log at Amazon’s request.

I own the Sovol SV06, it was my first printer but it was also the cheapest option for me ($169 IIRC). The Sovol has given me two problems in the entire time I used it:

1. When it came in, the extruder was jammed. Wouldn’t print or extrude any filament for some reason. Followed a 2 minute video on Sovol’s Amazon page to resolve it (although it did involve disassembling the hotend).

2. The extruder decided to encase itself in plastic one day when I printed something on it. That was a bitch and a half to clean, had to take a heat gun to it to soften the plastic then scrape it off without burning myself. My best guess is it was caused by me forgetting to run bed leveling after moving the printer a bit, hasn’t happened again.

Other than those two times it just works every time I need it. It was sitting dormant for ~3 months and I just kicked off a print yesterday, no problems. Fired right up and everything printed perfectly.

With that said, is it €239 of “Just works”? Probably not. I immediately couldn’t do some prints I planned because of the build volume (although all three of your options have the same build volume). So I’m already considering upgrading to an SV06 Plus. So check some of what you want to print that it’ll fit in 220x220x250.

I did some research on your other options and as far as I can tell, the main difference between them and the Sovol is the all metal hotend and print speed.

Sovol SV06 has an all-metal hotend so you can print high temperature filaments (PETG/TPE/CFN/etc) without worry (does require a harder nozzle most likely though). The other two seem to have some metal but are not fully metal, so if you want to hop into the more exotic materials you’ll have to upgrade those.

Second is speed, my SV06 prints at 80 mm/s. It is slow. Smallest prints take around 2-3 hours. My current print will be done after 24 hours. This is fine for me as most of my prints need complex geometry, so I’d rather it take longer and be accurate than run it too fast. The others claim a max speed of 250mm/s which would be a bit over 3x faster than the Sovol. If they can actually print at that speed without looking awful, that’s a pretty big upgrade time-wise.

If you need exotic filaments and don’t want to upgrade the hotend yourself for it then consider the Sovol. Other than that, the price in your region makes it not an option in my opinion. The Sovol just is a budget printer, only makes sense at budget prices. The Kobra and Ended you mentioned look very similar other than that, they both have auto bed leveling (a must have), same build size, very similar designs. Personally I’d lean towards the Ender, just for the community support. But do some research and see how many community member posts you see online resolved with the two. They seem to be functionally identical to me otherwise (just looking at a spec sheet, I do not have irl experience with either of these printers)

Even if it started out that way, where “surge” pricing is current pricing and “off-surge” pricing is cheaper, leading to consumers paying less overall, it won’t stay that way. It would only be that way to prime consumers mentally to accept that dynamic pricing. After which they’ll slowly increase prices, 10 cents or whatever every month. Soon enough it’ll cost more and the corporation can brag about how it increased profits again this quarter. Remember publicly traded companies are legally obligated to maximize profit - the only time they aren’t doing so is when they’re burning money to prime consumers to accept bullshit or building a captive base, in order to eventually maximize profits.

Last time this came up, just spoofing the Firefox user agent to Chrome made it work perfectly. Maybe they block it because they haven’t tested it on Firefox yet, but it works as well as it does in Chrome.

And if they haven’t had the time to validate it in Firefox yet, that is a conscious choice by MS to not dedicate time specifically to validating in Firefox and treating it as a second-class web browser.

They can be or they can be paid through “escrow” and your mortgage servicer will pay them.

Usually sites like these want to show total monthly cost though, so they tend to include estimates for property taxes and insurance in the monthly payments. Whether it gets paid through your mortgage servicer or directly by you doesn’t change much.

Oil in your pasta water does literally nothing, just skip it.

Owning a ghost gun is a crime, right?

(Ignoring the fact that “ghost gun” is a meaningless and intentionally emotionally charged term)

In New York, yes. In the vast majority of the US, no. It’s illegal to file the serial number off an existing firearm, but 100% legal in most states to manufacture your own unserialized firearms for personal use. Just cannot be sold/transferred.

I’d note the article you linked says nothing about how many of those are actually 3D printed, it is infinitely easier to deface the serial number on an existing firearm than it is to 3D print one.

Android auto runs on your phone. Android automotive runs in your car.

Yes, but Android Auto does need some work on the car OS side to operate, i.e. within Android Automotive in this example (although Blackberry QNX is probably more common these days, automakers are moving away from it)

I mean, I don’t like my car updating but I’d rather things get fixed than not. Software recalls are a huge headache in the auto industry, and being able to just download an update that fixes something is way easier than going to a dealership and having them use very specific tools and software to update the car/modules.

It’s also used for anti-theft features for a lot of newer cars, if your car is stolen it can be remotely disabled entirely. That’s really what’s more scary in my opinion.

Not entirely unrelated, Android Auto is basically a projection app for Android Automotive.

Yeah, pretty much all new cars have some amount of cellular connectivity. Usually you can’t actually use it without paying some subscription, but the manufacturers use it to push updates.

Almost always this is a player issue as mentioned. I’ve had similar issues with some files where audio just doesn’t work on one player but works fine for another. Same with subtitles. Set to an external player like VLC and see if that fixes it. (For what it’s worth, I mostly access Jellyfin from my Chromecast and I have it set to prompt me for a player each time I start watching something, one of them always works but for my files it isn’t consistent which)

Interesting, I know personally one of my concerns with self-hosting an individual Lemmy instance (after losing my first account to the Vlemmy.net shutdown) was the threat of being held legally responsible for things cached on the server. Say someone uploads something illegal and my server caches it. Seeing it as an option to turn that off is nice, and for an instance only meant to be used by one person I’d imagine caching won’t have a huge impact on load times

Not surprised but got a source on those password claims?

HP makes calculators still, actually. Can’t say I have any love for their printers but the HP Prime blows any TI equivalent out of the water, easily the best calculator I’ve ever used.