Kept forgetting to tell you, you will want this for your ams and I use these for dryboxes. You can just grab some totes from the dollar tree or somewhere cheap and throw those in with the filament. Quick and easy way to keep your filament dry.
Here’s a hygrometer stand of the same type so you can keep it uniform.
Fill them with this stuff here.
Make sure it’s the rechargeable kind so you can just keep redrying it and you’ll never run out.
This is all especially important if you plan on printing PETG. PETG is affected much more by moisture than PLA.
Well support structure will be needed on overhangs and stuff like that so don’t write it off.
I don’t use it much since I’m mostly printing things that don’t need it as they were designed to print in place.
No, no. I offered assistance.
What do I do with the white one? Put it in the last slot? Does the machine know when to use the white one as a support?
I don’t use the support filament as I have enough filament that using a bit for a model or two here or there isn’t a huge loss. However, you can use the Bambu Studio program and “paint” the support structures with that filament and it will use that instead of whatever normal filament you are using.
(Note on this, because these machines use NFC for the official bambu filaments, it might do it automatically. Don’t count on that though and always double check.)
You can keep it in your AMS anywhere you like, but for those onboard print files, it typically uses AMS slot one.
What would you consider is your favorite filament to work with? I’m thinking of splurging on a set off ebay. But at the same time, are discount filaments ok?
I love Inland filaments because I’m close to a Microcenter and can go and physically look at them before purchasing them. If you aren’t close to a Microcenter though, Inland filaments are Polymaker and eSun.
If you plan to get cheap filament, make sure you keep your bed as clean as you can because you want to rule that out immediately if there is an issue. I use Isopropyl alcohol before every print to remove any grease/oil/dust from the bed.
And do you use a special plate? People have mentioned golden ones that are easier to bend to pop out the build? Mine just scraped off fairly easy. And I’ve read to use hairspray or windex to make it easier to pop off later.
I use the standard PEI plate that comes with the machine. I allow the bed to cool off in the machine and then get the print off. Makes it much easier.
Controlling these printers is best done from a PC. Bambu Studio will give you the most options to control your prints. The Bambu Handy app works great as well but I find it limiting.
It’s ok, my dude. We all make simple mistakes like this. I’ve cost myself entire rolls of filament before. If you ever have any questions, give me a shout, I’ll give you a hand.
These printers calibrate themselves.
Not sure, I’ve never opened mine.
This is it here: https://us.store.bambulab.com/products/support-for-pla?variant=40524454723720
TDS says it’s still PLA.
Is that white filament the one that came with it? If it is, it is only meant as support material. Use the orange or green in AMS slot one and try again.
I feel the same way about Fahrenheit, but boy do people hate it when you say it out loud.
I’ve never had to use Kilometers much but I’m sure I wouldn’t have much trouble adapting to that as much.
Two eye patches, ear plugs, might as well throw some ear plugs in your nose too.
Make sure it’s above your face while doing so.
This is old web journalism. All the links in the text are actual links to other articles or pieces of information. This is how most news articles were in the 90s and early 2k. Y’know, before all the links in the text turned into ad links. This article gives a jumping off point to find out more info. The opinion piece does nothing but attract attention to the information linked within.
We’re all here talking about it so it seems to have worked. ¯\_(ツ)_/¯
As far as what battery it is, measure it in metric. (mm) Search up a button battery chart. One of those should have voltage and measurements you can compare against.
Second try still got denied.
I’m aware, I may have just done it a bit early on in this fiasco.
Edit: “We will not be granting a refund at this time. The date of the purchase exceeds 2 weeks (our refund policy maximum).”
They pinged me for owning it more than two weeks, so that’s fun.
They denied my refund. ¯\_(ツ)_/¯
Hopefully someone recommended for you to grab the .2mm nozzle since you’re interested in minis.
It’s here.