Is it possible? Yes. And you’ve mentioned stability could be an issue. I’ll add that if you count your time and wasted plastics to test the thickness, infill, etc. I think it’ll cost more than just buying the extrusion.

That said, if you already have core xy printer, you can start testing by replacing the frame with a printed parts. Starts with the vertical ones.

1. If micro stepping varies that much then FDM printers (and CNC machines) wouldn’t have worked so well. Also, you can tune the micro steps, if you need 410 steps to move exactly 10mm instead of the default 400, just change it. (I just pull a random number btw, it’s been at least 5 years since I touched my Marlin firmware)
2. If you’re familiar with coffee grinders, they’re basically using thread to adjust distance between 2 burrs. Even there (mid to upper-mid range ones) can’t guarantee the same grind size on the same setting for different unit of the same model, eg. setting 11 on grinder A will have slightly different result compared to another unit of grinder A on setting 11. Can it be done? Yes, one example is Commandante, that is a $300 hand grinder.

Tight tolerances will exponentially skyrocket production cost, period.

It’s extremely expensive to produce things with tight tolerances. Cheap 3D printers have gotten away with it by making things “good enough”. Which why you got this the other way around;

In short, instead of an arbitrary number like 0.3mm that has no meaning to the user, they tell the user to turn this knob 1/4 of a turn. An instruction the user can follow.

0.3mm is easy to measure with the right tool like digital indicator. On the other hand, quarter turn on a knob might adjust 0.3mm on one bolt, but 0.5mm on another.

Also as mentioned, ABL, cheap and can be DIYed. Cheap / printed parts can warped over time, bolts can shaken loose, etc. ABL just put these out of the equation.

Turntable uses needle to feel the “bumps” and turn it into sound, if the needle can feel dusts (which is why people always wipe them before playing), it can definitely feel the layer lines.

Dusts are like what single digit microns? while the best resolution for resin printer is at 10 microns.

I just use the cheapest fruit dehydrator and snips away some of the trays.

It really depends on your lifestyle. Most machines will need some heat up time and if you’re not sure you won’t be pulling another shot for the rest of the day, it’ll sit there, consuming like 1000+ watt of power, at least when the heater is on.

I got myself VBM Domobar (HX) more than a decade ago, and still going strong. I don’t regret it. It was especially useful during covid lockdown.

Again, it really depends on your lifestyle. It is higher maintenance than any filter brewer. Demands higher end grinder, although those are much more affordable these days.

I over-bought on size and have a hopper that holds nearly a pound of beans; I rarely grind more than a shot a day, for myself.

That’s what’s happening in cafes with their EK43s anyway.

Does the anti-static feature really seem to work, in your experience?

Mine is the OG DF64, anti static feature is not there. RDT. I got mine because of SSP compatibility and my Eureka Mignon is showing its age. And I wanted something that can handle espresso and filter.

I’ve been using https://utteranc.es/, same concept but using Github issues as comment. This is interesting, especially if there’s a way to handle each user’s instances.

I have 64 with SSPs, and loving it.

Wasn’t the Sette higher end than DF64?

What is VSO?

I just plug 500gb usb stick on my Asus router (Merlin). Install transmission, and turns on vpn and smb share. Playback is using iina on Mac, mpv on Android, and Outplayer on iOS.

If it’s fine with PLA then my money is on profile issue. Use your PLA profile, and just change the temperature. If that works okay, start tuning for PETG from that point. And delete the old PETG settings.

That looks like it’s not melting fast enough for the extruder speed. Try higher temp, or slow it down, or both.

Unpopular opinion: Bale happened to be the Batman of the best Batman movie, his Batman is kinda meh. And I wish Afflect was in better Batman movies.

Gmail to MXroute when Google threatened to pull the grandfathered free Gmail custom domain thing. Got their lifetime plan, easy enough to configure so outgoing mails don’t get marked as spam. However, the major downside is it’s still using Spam Assassin as spam filter.

It’s not obsolete, it’s very good, still is. Just that Flask and Django both built on top of Python. So if it’s like late 90s or early 00s. Definitely before either Django / Flask. Python isn’t the new and thing of 2022.

Isn’t Wordpress powering like 40% of the internet? PHP isn’t going anywhere anytime soon.

For me the weirder part of that meme is Python in 2022?

I’ll be that guy. The picture shown is cold drip. Cold brew is when you mix coffee and water and left it in the fridge for x hours.

But really, among the pictures, I’d pick Napoletana simply because I’ve never had them.

Weird, I don’t have that. Free user for years.

Is the free version of Spark not good enough? What paid feature you need?