![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/a4cb9e53-9f83-42ea-ba63-49eb81a0e04c.jpeg)
Germany has a ton of the no speed limit signs. But in reality they are just no artificial speed restriction signs, meaning drive the limit of the road type you’re on.
Germany has a ton of the no speed limit signs. But in reality they are just no artificial speed restriction signs, meaning drive the limit of the road type you’re on.
Second note, the metal pipe has to be continuously metal from at minimum where it enters the house, don’t trust that if you see a metal water pipe (or drain pipe) that it’s grounded.
Five years ago this was valid. Hell even two years ago.
Today… You’re most likely to get a bullshit sales pitch disguised as a blog that doesn’t actually answer any question you asked but has one word in it from your question sentence.
I store in home Depot containers with desiccant in the bottom. And have another modified to print from. (Printed spool holder with bearings, reverse Bowden through container side)
It really didn’t change my workflow, just where to get the spools to load, and where to load them.
Print quality improved greatly.
Vodka… Right… “Vodka”
Yes ish. One could still be there at the scheduled time, but the bus could’ve been slightly early. Or the route/run could’ve fallen out. Or the bus could be full.
Home assistant, and frigate. Along with whatever type of smart lock you choose (even building one with esphome, diy version)
And he lied.
If “loud pipes save lives” was actually true, they’d point them forwards.
Automotive groups, forums, clubs that focus on your individual brand of vehicle, or better your specific vehicle.
Brands generally keep the same style or type of system across their range, so if it works for one car in the brand it is much more likely to work on another.
My Chevy volt, for example, has a separate controller from the engine controller, and I could just airgap(unplug) it.
Others you may have to remove the antenna, replacing with a dummy load to not permanently damage the circuits.
Those posts were installed perfectly parallel. Nice
Yup, this is why in my own vehicles I physically disconnect the system that sends these messages.
MooooooooooooooooooOOOOh
Could tie it into adsb and send complaints with specific tail#s
Sounds like a market niche, you could start it up, call it something like “macrosoft”. … then start making scripts that do the work for the user, don’t release the scripts because people pay for them. Let this go on for many years and you find yourself shoving “AI” down your users throats and screenshotting their desktop without explicit permission…
Handle is much different than efficiently calculate.
Just make sure they have substreams and get a coral (or GPU) for detection. Then a pi could probably handle it.
I have enough processing to do it all on CPU (8 cams+doorbell) but it ramps up the power usage, so it was better to use the gpu I already had for transcoding, as detection.
Without you can still just record and overwrite. Not that it’s extremely useful without detection and notifications.
Yes, the issue I have with no sub stream (only on the doorbell) is that it uses more processing for detection on such a large resolution.
The doorbell does, except for no sub stream. And the only way for mine to be setup is their bs app.
I should’ve looked better when buying, but alas. I have this one and I’m lazy.
I have a few. Some try and call home (mostly the doorbell, every 10s). The others are easy to setup and run with frigate.
Sweet, that’ll help with the ground priest they’re about to get.