I have exactly the setup you described, a Raspberry Pi with an 8 TB SSD parked at a friend of mine. It connects to my network via Wireguard automatically and just sits there until one of my hosts running Duplicati starts to sync the encrypted backups to it.
Has been running for 2 years now with no issues.
Also works well for the opposite use case.
I’m a good programmer but bad at math and can never remember which algorithms to use so I just ask it how to solve problem X or calculate Y and it gives me a list of algorithms which would make sense.
Thanks for the tip! I took a look and it seems like Recognize uses this: https://github.com/jordipons/musicnn
Last update was 4 years ago but will give it a try this weekend.
Once again, the format doesn’t work for me when the main topic is about a fad that nobody talks about anymore.
It worked in South Park for a long time because they had a relevant episode a week or two after it happened. In Futurama, not so much.
The Bender story was pretty neat though. They could have left out all of the NFT stuff and focused just on the Bender plot and it would have been a significantly better episode.
So what’s the big fuggin’ problem here? That Intel won’t use the term “recall”?
Would you say the same thing about a car?
“We know the door might fall off but it has not fallen off yet so we are good.”
The chances of that door hurting someone are low and yet we still replace all of them because it’s the right thing to do.
These processors might fail any minute and you have no way of knowing. There’s people who depend on these for work and systems that are running essential services. Even worse, they might fail silently and corrupt something in the process or cause unecessary debugging effort.
If I were running those processors in a company I would expect Intel to replace every single one of them at their cost, before they fail or show signs of failing.
Those things are supposed to be reliable, not a liability.
I’m thinking of Ripping my CD collection again. I’m researching a way to use a LLM to tidy up the metadata.
If you ever figure out how to use AI to determine the genre(s) of a song, let me know. Have been looking for something like that for quite a while.
Sodium-based batteries currently have a lower energy density than lithium-based batteries so they are only useful in some applications.
I don’t think you can import pfSense configurations into OPNsense. I switched from a DIY pfSense box as well and redid the config.
You can look for a converter or install pfSense onto it though.
Because it’s dope.
Also, according to their website the 10 and 25 Gbit/s packages cost the same per month.
Also, still cheaper than my 1 Gbit/s connection.
They are expensive but I run a OPNsense DEC740 and have no issues with my Gigabit fiber, even without modem and the PPPoE overhead.
You can still try playing with hardware offload on/off and if you use PPPoE, it runs on a single core by default.
This integrates Meilisearch but without having to mess with the Jellyfin search code while Jellyfin is transitioning to EFCore.
FYI, you may need to change the logo. I didn’t think 3rd party tools are allowed to use the official logo, but someone who knows more about that will need to weigh in.
Good point, I don’t mind changing it if it’s against their guidelines. It’s more of a crutch until full-text search arrives in Jellyfin proper, no need for a fancy logo either way. :)
My first sentence when I get connected to a chat bot is always “Let me speak to a human”.
Off the top of my head, why did you set the prefix to 0x1? I was under the impression that it only needs to be set if there are multiple vlans
I have multiple VLANs, 0x1 is my LAN and 0x10 is my DMZ for example. I then get IP addresses abcd:abcd:a01::abcd in my LAN and abcd:abcd:a10::bcdf in my DMZ.
However, I get a /56 from my ISP wich gets subnetted into /64. I heard it’s not ideal to subnet a /64 but you might want to double check what you really got.
what are your rules for the WAN side of the firewall?
Only IPv4 + IPv6 ICMP, the normal NAT rules for IPv4 and the same rules for IPv6 but as regular rule instead of NAT rule.
My LAN interface is only getting an LLA so maybe it’s being blocked from communicating with the ISP router.
If you enable DHCPv6 in your network your firewall should be the one to hand out IP addresses, your ISP assigns your OPNsense the prefix and your OPNsense then subnets them into smaller chunks for your internal networks.
It is possible to do it without DHCPv6 but I didn’t read into it yet since DHCPv6 does exactly what I want it to do.
I’m no expert on IPv6 but here’s how I did it on my OPNsense box:
WAN interface (probably already done)LAN interface, use Track interface on IPv6, track the WAN interface and choose a prefix ID like 0x1::eeee to ::ffff, you don’t have to type the full IP)Advertisments to Managed and Priority to HighAfter that your DHCP server should serve public IPv6 addresses inside of your prefix and clients should be able to connect to the internet.
A few notes:
Reddit once banned me for “vote brigading” a post on a subreddit that was linked in a different subreddit, a full year after I upvoted said post.
That was the day I stopped interacting on Reddit.
Can confirm this works, removed my tablet screen with my 3D printer.
Is it safe to use JELLYFIN_SQLITE__disableSecondLevelCache all the time or should it only be used for testing?
I have had a lot of database lock issues since 10.9.
That website is horrible, reads like somebody having a temper tantrum.
Hunt works perfectly fine on Linux, played a few rounds yesterday.
Tarkov still does not.