I have no diagnosed neurodivergence and I’m looking at that list with surprise. Like, you know how fucking hard I’m working to pretend I can do that stuff?
A person who can do all that shit looks like a superhero to me. No talent… fuck… if that list had telekinesis on it’d feel about the same to me.
Oh wow, that sounds like a cool project. I will look into it.
I ended up making an awesome esphome rig for my garage door. An esp32 board, a magnetic switch for position detection and a little relay that closes for .5s connected to the wall button wires.
Super simple and it works crazy well. It also cuts out all the proprietary shit the manufacturer would prefer I use.
There are so many things you can do to make these cheap printers reliable that I really could not list them all. When it comes to bed and first layer issues here are the biggest ones
Make sure your X gantry is tight and not sagging. The eccentric nuts on the guide wheels should be set so that there is very little play. If you lift the left side it should not move much without raising the gantry.
Tram your bed with the screws almost bottomed out. Loose screws mean that the bed is moving more and will not likely hold a level for long.
The bed must be warm during abl. these things warp and twist like crazy when you heat them. You will not get good results on these cheap ass beds if your machine measures its shape cold.
If you are not using a pei coated sheet to print on buy one asap. It is a superior print surface and a huge leap in print technology. It’s less important with pei, but it is worth noting that the print surface must be clean. Oils from your fingers mess with adhesion to the print bed.
Those are the big ones. There are like I said a million little things you can do. These things can be made into reliable work horses but it takes A lot of research, work, time, and often money to make them such. My ender 3 has cost me more than a prusa would have, which is pretty dumb tbh. On the other hand, it’s mine and there is no part of it that I do not understand. I like my printer. It’s very fast, very reliable, and I made it that way.
Ha, I roasted you for having the good sense to let somebody else handle some of this stuff for you.
Nobody in crazy rabbit hole club is allowed to do anything the easy way!!
I definitely did not claim it was braking privacy. As far as I can tell it was just querying an update server but for some reason it was doing it with such frequency (hundreds a minute for hours out of the day) that I deemed it was broken and that the OS was not managed well.
Other people took a more suspicious view but mostly they just lost my trust that they had any business running a system on my network. If you google around you can get more nuanced takes I don’t actually know if they ever fixed it.
HAOS is a managed operating system, which is perfect for people who want to automate their home but don’t want to manage a Linux machine. It’s a little wild to me to see a person in this community advocating a managed OS. Like, what are we even doing here??
I killed HAOS and set it up in docker because it was phoning home a lot. Sometimes there were hundreds of dns queries a minute to HA servers. No thanks.
One more vote for the SKR mini e3. Best upgrade you can do for one of these printers.
Fascinating. A whole hidden world.
Man I have never understood what people are doing to make money with a 3d printer. It’s an incredibly inefficient manufacturing technique if you need quantity of a part. So, how does that business even work. Who the hell is buying all those… green rectangles? What are they for??
3d printed plastic guns are real in a sense but not in any practical way. I am not sure why so many people think this is a concern. If I have a box of ammo, I can probably go into my shop and come up with a way to fire it. I doubt I would use my 3d printer in that project though. There are better ways to makeshift a weapon.
The length of a day is variable. You would have to update the second (and every unit derived fro It) after every big earthquake, and a thousand other events.
The solar system does not give a shit about your preference for base 10 numbers there will always be (roughly) 365.25 rotations per revolution and you don’t get a choice about that.
Well… a tablespoon is 3 teaspoons and a cup is 48 teaspoons. You did get the 16Tbsp per cup right though.
This was a good try!
When I first read your comment I wanted to say that managing with these units isn’t really all that difficult. But, then I remembered that I have a magnet on my fridge that converts teaspoons to cups to quarts etc. I don’t know anyone who keeps that info in memory. Doubling or halving an American recipe can be an exciting math project
It’s fun to see what metric conversions an American has memorized. If a person can quickly convert miles to Kilometers, they are probably a runner. If you ask a group of colleagues how many grams are in an ounce, the dude who quickly say “28.3 give or take” is a pothead.
The real charlatans were the “the technology has promise” people. No, the technology was dumb.
It’s an interesting argument but I think it is stretching things too far. Also isn’t a little anthrocentric to assume that our relationships are unique and different than all other living things here.
A pine tree drops needs that are so acidic few other plants can grow near it. Is it damaging the ecosystem?
Our relationship with bovines is weird right. probably the most successful large mammals on earth. Their success is completely due to being a great machine for turning grass into human food. It’s symbiotic in a lot of ways: we clear pasture and kill predators for them, but also, we eat them. Great for the cows and us, sucks for the trees and wolves.
Ants and aphids have a similar relationship. Great for the ants, and the aphids, not so much for the plants.
If you want to conflate human economics with the natural world, you would have to admit that nature is the domain of the most ruthless of capitalists. Christ, the whole point of a lot of leftist thinking is that we must “rise above” our animalistic nature.
What annoys me about this meme is that it is the same relationship that underpins all business relationships. I understand you are not happy with the state of things but showing a drawing of “capitalism” at work in nature isn’t really making the point you think you are making.
This might as well be a pic of two guys in suits trading on a stock exchange floor with the same caption. Or add this to a caption to a pic of a lion eating a baby gazelle while its mother watches from the tree line. What point are we even trying to make here??
Studying evolutionary biology in my undergrad had a big impact on how I look at systems. Judge them by their effect, and not their parsimony. If the mess inside starts to negatively impact efficacy, it will almost always get replaced and almost never get fixed.
Getting obsessed with “how the sausage is made” is a pointless endeavor. If it’s good, eat it, if not make something that tastes better.
Criticism of Israel and Hamas seems pretty neutral. Praising Israel seems pretty Islamophobic and praising Hamas seems pretty antisemitic.
It’s the same thing the right does with government. It is a truism that there is all sorts of “inefficiencies” where the money is going to the wrong people for the wrong stuff.
In both cases, it’s sort of correct and sort of wrong. Corporations, governments, and any human institution beyond a certain scale (a few hundred people), will leak wealth into places it shouldn’t. It’s an unavoidable feature of our species as best I can tell.
It’s fine to accept it, it’s fine to be angry about it. It’s silly to blind yourself to it in some places and whinge about it in others.