Sweet! My first computer was a 333mhz PowerPC Mac! Still have that behemoth. Man, I learned video editing and 3d modelind on that thing and totally changed my career path.
Now 25 years later it’s decendant (roughly?) is a SoC running a wireless hub!
Can confirm. Neighbors house had an attic fire with knob & tube wiring.
… Just like the stuff still in my place today. Eek! Landlord won’t upgrade unless there is a problem. In my house, the breakers are all 20amp and that’s a lot to run on, best guess, 70 year old wires.
Oh, and do not assume anything is wired as expected. Test after. I’ve found a couple plugs “upgraded” to 3-prong by jumping the load and ground together. That made for a fun firework show when my metal fan touched something metal. Even the landlord was impressed by that stupidity.
A cheaper solution is to take a copper wire and connect the ground screw of the socket to a water pipe. It does the job and is better than nothing.
I use kimai.
It’s grown over the past few years and lots of bugs squished. Could use a little developer help regarding custom invoice templates, but I like the direction it’s headed.
There is a convenient app that works pretty well. I think it’s a couple bucks now, but nothing outrageous.
Why not dockerize Foundry and run all on the Synology?
Though I did convert my home assistant docker to HAOS on a Pi for extra features way back in the day. Not sure you have to now.
Oh nice! I knew hot swapping was supported on many other devices but not PCIe itself. Feels wrong to rip a card out while the system is powered up.
Nope. I actually did that unintentionally on a PC I built. I only used one power wire when the GPU needed 2 so it couldn’t use all the power it needed when running 100%. My understanding was PCI doesn’t support disconnecting devices so the system expects all components it starts up with to be available all the time. Lose one and the system goes down.
I find Home assistant has all these points with the exception of accessibility; I only have one account so I never encountered this scenario.
The trace feature is amazing to visualize the logic.
I do wish it had a test run feature so you can simulate different examples and data to see is the automation behaves as expected. I had one finicky automation that would fudge up after midnight.
Hmmmm. We’ve had single click LAMP installs way back in the early 00’s. Heck, web servers were a single check box in OSX. It’s just gotten really complicated since then.
Data centers work great because tech and staff work together in proximity to keep things smooth. To decentralized a data center …
I’d start with a VPN; without which, you’d have too many unknowns. I’d have local user space (probably a VM or docker environment) linked to a remote auto-magically configured proxy server and network infrastructure. (A lot of people do this anyway with wire guard or the like) Complete automation is the key here.
Users would install apps from docker (preconfigured) and the environment automatically establishes the VPN and sends port data and settings to the proxy service. DNS/fail2ban/security is set up, and goes live in a minute or two. Of course that wouldn’t work for things like Pihole or adguard.
User is responsible for disk/CPU, service provider for networking, well except ISP stuff. But anything average-user-easy will have to be mostly prepackaged for ease of use.
Oh, and if there are things that go wrong, clear explanations are essential. Things like “could not bind 0.0.0.0:80” could be “Hey dimwit, you already used port 80 for XXXX program. Pick something else!”
Or, you know, a script could do that.
I don’t think self hosting is average person territory at all.
I noticed 2 services out of dozens weren’t working last week and restarted their docker containers when I got home. Working again! Easy.
Nope. They only work on local LAN. Turns out IPv6 wasn’t working so I had a heck of a time tracking that down.
Home assistant kept giving me errors about my reverse proxy not being trusted, but all the settings were correct. Tried adding IPv6 addresses too, but never got that working. The only thing that worked was change the network interface from Ethernet to wireless.
There are a LOT of gremlins in selfhosting. It’s a fun hobby and rewarding, but definitely not for everyone.
In my experience, noooooo.
I’ve had too many momentary disconnects with USB devices to trust that on a 24/7 server.
An early server I built had a large USB backup drive for a RAID5 array and every month there was usually something that went wrong.
I loooove bad movies. Not religious-bad, more mystery science theater bad.
I rip everything and plunk it into it’s own library just for me.
If you have the space and time, go ahead and limit access to her. She’s already seen them or will anyway. You hosting a file for one individual isn’t going to tip the grand scale of anything.
If you have a moral issue against it, don’t host the content. You’ve already made up your mind, it’s just taking you a while to realize it.
I primarily use 2811’s and my first projects were very susceptible to RF noise. It took me a month to figure that one out.
Don’t use cheap-ola power supplies and wall worts from unknown past gizmos. (But even the simple Chinese metal boxes off amazon work) And by all means keep your phone away from your project. It took me ages to associate a text message to static.
And add a capacitor to filter out power noise. That was a big one for me.
Double check settings, pins, and use a level shifter if you need a signal boost. I sacrificed one LED attached straight on the board to bump the pin output from 3v to 5v.
That seemed to do it for me. Good luck!
Immich was my first donation too. It’s grown so much, implemented features from user suggestions, and is quite polished.
It started as a Picasa/google photos copy, but is so much more now.
Can’t wait to see where they are headed.
Syncthing is very, very good at syncing, but I get the sense the developers are very specific about keeping to the core objective. There have been other features that would be nice, like have one device sync and archive old/removed files, that many have asked for but rejected. (There is a way, but it’s clunky and sometimes gets out of sync.)
I don’t think a cross-user sync solution would ever come to this app. You’ll have to create a unique folder and “device” for that.
🎶 I believe I can fly 🎶
Someone had to…
That’s my setup. I like selfhosting, but leave email to other services. I got tired of being on blacklists.
That said, namecheap email servers are still on blacklists. I’ve locked horns with tech support a couple times because legit email gets dropped. Unless you pay for a vps or something more expensive, you’re thrown in with the spam and scum class.
It works for the most part for my needs.
Of course the big question is “what will you use it for” because some uses will run just fine.
I would max that out so fast though.
Gotcha. I missed that one. :)
Ahh good point.
Heat may be an issue if it is very cramped, but could work. Letting the motherboard handle raid would be better, but add one heck of a bottleneck. I’m still leaning towards one large SSD or perhaps external storage.
A video archive on external would work fine for a couple users, but sharing disk bandwidth with the system would suck pretty fast.
I use syncthing for backups including some phone files, but I’m not sure this would be good.
Syncthing devs clearly don’t want this app used as a sync-and-archive tool so all phones would have all copies and any phone can permanently delete any file. I wouldn’t trust that.
(Yes, there is a roundabout way, I do it too, but it is prone to errors and sync issues)
I second immich and backup. immich can archive as you want, and Syncthing can make backups of files.