I wouldn’t add a new glass sheet + magnetic sheet + PEI sheet on top of the original bed on a bed slinger because this is probably at least twice the weight of stock, which will cause issues when you get it moving back and forth rapidly. Think of how agile a petite individual can be compared to someone the same height who weighs 300lbs.

Just get the $25 magnetic sheet and PEI plate, and slap them both on there. If you do go the route of a new aluminum bed, you can heat this bed up to 80 or 90C and then peel the heat pad off of it and stick it onto your new bed. I did both these on my old Sidewinder X2 but didn’t notice much benefit to the aluminum bed (the OEM glass bed was slightly warped and concave), so I didn’t find it worth the money to be honest. I think it’s worth trying in stages since you’re not really out any money if you decide the simpler and cheaper solution doesn’t cut it.

Alright alright alright

Caprice (or Taurus?) police car and fingerless glove really date this photo.

Probably because it was an affluent school. In a school with more poor kids, stuff like this is their little chance at feeling higher status than their peers even though it’s all imaginary based on marketing.

I disagree with it being a first layer issue otherwise it would be failing much earlier not 80% of the way through the print. If the first layer being too thick were the issue, it would also be visible or colliding with every layer below this one too and those layers appear to be fine.

Do you have other filament to test with? That would help isolate the issue to either the filament or the printer. It could be the Z axis screws need lubrication especially if you notice this issue happening at around the same height.

How many hours are on your nozzle? Ive had to swap out my nozzle on my X1C after having similar issues and they went away. Even the hardened steel nozzles wear out and allow too much flow through them which leaves extra plastic on the print that can lead to collisions.

Check serverpartdeals.com for HDDs. They’re used enterprise drives so they’re much cheaper, but there’s always the possibility of getting a bad drive so they should be tested first. If you’re just storing pirated stuff the risk isn’t super great since you can just find the files again. The next best option is shucking external drives like WD Elements/Easystore/MyBook as they’re typically half the price of the bare WD Red drives and are virtually the same thing with a different label. I have bought about 15 drives using both these methods and haven’t had any issues. The shucked drives have been in use since as far back as 2018.

A better value is just getting 6th gen or newer Intel CPU and using its built-in GPU to do the transcoding. If you want a discrete GPU, any low powered card that supports HEVC should work. Alternatively, you can get something like a Roku device to connect to your TV as they have pretty good compatibility and you’ll avoid transcoding all together.

What are you using for storage?

You may be conflating this with adding lanes to the freeway which doesn’t reduce freeway congestion since it’s all rush hour based traffic, but I fail to see how adding more lanes in a city wouldn’t reduce congestion for people who live there. If you have 1000 cars they’ll fit more densely in 3 lanes than they would in a single lane since they can drive in parallel to the other vehicles.

Independence’s show? Crazy seeing a neighbor here on Lemmy.

Looks like AI to me. Why are there pinecone reflections on what appears to be a concrete wall in the back?

I’d love to see another photo of this basement window well.

I don’t have IG either but I do know TheKitKiln is based out of Thangs.com. This dude used to go by BigBricks and had a ton of incredible Lego megafig designs before Lego and Disney sent him a cease and desist. His work is always top notch and all of his stuff is designed to work without AMS or glue.

This seems more like a server with a built-in NAS, but i agree it’s probably way overkill for most, though it seems like an awesome product at first glance. It’s like they took every component and cranked it up to 11. I wish we saw more of this in the consumer electronics segment and less “let’s strip or nerf everything we possibly can before sales tank. Our margins are so great this quarter!”

Is that NVME only half length still with a full TB? It almost looks to be the same size as an M.2 wifi adapter. Crazy that they’re getting this small.

I recently bought two cheaper 1TB NVME and have some premium ones from several years ago but they’re all the full 80mm length. I have yet to come across ones this small personally.

There are way too many counterfeit cards mixed in with the legitimate stock out there for me to bother spending too much on any single card. I typically go for the midrange offerings and roll the dice.

And they crap out so quickly. I can’t even count the number of SD cards I’ve had to throw in the trash. I don’t think I’ve ever had a 2.5" or 3.5" drive completely crap out on me (though I have had bad SMART data indicative of a dying drive) and I have been running a media server with dozens of TBs for over a decade now.

A class action Karen

This is one change (which isn’t the cause of OP’s problem) that they announced months ago. I’ve been using it for well over a decade and while I have had major issues with it in the past going so far as to setup Emby and buying a lifetime license for that, I would hardly say that they’re “constantly changing allowed abilities.”

Most people’s issue with them is that they focus too much on adding new stuff that nobody asked for while ignoring longtime bugs. I can’t recall a time they’ve ever locked anything behind a paywall that wasn’t a brand new feature prior to this.

OP has a misconfigured server and isn’t connecting to their server over LAN.